联系电话:0755-84552801

手机号码:18926061910

Product
产品中心
Center
SID 4 系列(SID312、SID314)
    发布时间: 2023-03-27 16:05    

- SID 4 四极继电器
具有两个独立触点组。
带有符合IEC 61810-3 A型的力导向触点,采用环保设计。
继电器驱动器有两个独立作用的磁性锚固件。
可以在继电器下方进行部件组装。

SID 4 系列(SID312、SID314)

PDF下载

   

 - SID 4 系列
   SID 4 四极继电器

  • 继电器 带强制导向触点 符合IEC 61810-3型

  • 防护隔离(参见:绝缘数据)

  • 适合PCB安装

    -采用焊接链接

    -采用ELO引脚压合技术

  • 每个通路串联2个触点的双衔铁继电器

  • 仅可能有一个继电器的双通信性能

  • 元件可以贴装在继电器下方

  • 厚度仅10.9mm

  • 触点组件






新继电器SID4系列是双电枢继电器,根据IEC61810-3,a型,配备了两个独立的强制导向触点组。继电器可用于功能安全的通道控制架构,例如SIL3(IEC 61061或Ple”(ISO 13849

 

具有两个可比较的传统继电器解决方案相比,面积节省约22%。由于触点组的内部布线和只有一个电磁线圈,PCB上的孔数20个减少到10个。与2SIF312相比,继电器的塑含量可减少39%继电器重量减轻13%在继电器壳体下为高度不超过约3 mm的部件创建了两个装配区域。相比之下,线圈功率可以减少约40%。额定功率为820毫瓦。线圈电压为5伏直流电至110伏直流电。

 

除了焊接安装ELOPINS压合技术)也是一种焊接安装技术。压合触点确保与PCB的气密连接。这与高连接质量和节省资源齐头并进,因为不需要焊接工艺


可获得ULTÜV的批准。



The new relay series SID4 is a double armature relay, which is equipped with two independent forcibly guided contact sets according to IEC 61810-3 type A. The relays can be used for example for 2-channel control architectures of functional safety e.g. SIL3 (IEC 61061) or Pl "e" (ISO 13849). Thus, among other things, 2-channel control architectures of functional safety, e.g. SIL3 (IEC 61061) or Pl "e" (ISO 13849) can be realised.

 

The area saving compared to solutions with two comparable conventional relays is around 22%. Due to the internal wiring of the contact sets and only one solenoid coil, the number of holes on the PCB is reduced from 20 to 10. The plastic content of the relay could be reduced by 39% compared to 2 pieces of SIF312. (13% weight reduction of the relay) Two assembly areas for components up to a height of approx. 3 mm were created under the relay housing. In comparison, the coil power could be reduced by about 40%. The nominal power is 820 mW. Coil voltages from 5 VDC to 110 VDC are available.

 

In addition to solder mounting, ELOPINS (press-fit technology) is available as a solderless mounting technique. The press-fit contacts ensure a gas-tight connection to the PCB. This goes hand in hand with high connection quality and saves resources, as there is no need for a soldering process.

 

Approvals from UL and TÜV are available.